Setting up the rest of the electrical accessories (part 3 of 4)

               After the luminaires are set up to the required lux levels, it's time to export all the information in a .dwg file so I can set up the switches, sockets and cables in Autocad. After turning off most of the layers introduced by Dialux, the available space within the drawing increases thus reducing the possibility of mistakes.

           After finishing the setup for the accessories and setting up the Layouts in the needed way I could plot the following:

                  Lighting wires are not connected to the switches (they are just pointing towards the relevant switch/switches) as there is more than one option for choosing the pathway of the electrical conductors.


Comments

Post a Comment

Popular posts from this blog

Building the rooms in Dialux (part 2 of 4)

Image
                 Now that I got a solid CAD foundation to build on, the next step is importing the .dwg in Dialux. (Right about now would be a bad time to find out about the problems in compatibility between the versions 4 and 9 in Dialux, and also about the fact that importing a new version of .dwg in Dialux 4 is not going to work out as great as you had hoped.)                   I chose a floor to ceiling height as 2,4 m, as it is the standard (2,2 m is considered the minimum, while 2,6 m is considered to be good).                    I chose luminaires of low output on purpose so that I could play around with the arrangement and try different combinations to reach the lux target. I have also changed the purpose of the rooms to suit the following targets: Kitchen - 250 lx Living room - 300 lx Bathrooms - 220 lx (downstairs)...
Read more

Starting with a floor plan (part 1 of 4)

Image
               In order to make sure I worked on a realistic architectural draft, I imported in Autocad the image below, belonging to one of the most common layouts for a 3 bedroom house.                Now, usually, with this kind of drawing, things are not going to be 100% precise, even with scaling and changing bits and bobs.                     Needless to say, I took some liberties.                 After I set up the scale and finished drawing over a transparent version of the image above I ended up with the images as seen below.                     And, finally, the end product, with the background image hidden in a separate layer.               
Read more